Have spare parts on hand order ahead of time

Be Prudent and order a extra one or two parts:

Having spare parts is important when accidents happen.

Having spare parts is important when accidents happen.

https://www.facebook.com/alarmsinutah

Above you will find our facebook page and helpful hints about commercial security and fire alarm systems. Take a few minutes to review these items especially if you are a loss prevention or rick officer in your company.

Just the other day we got a call from a customer needing some parts and we got them ordered. The door holders arrived but the extensions take several business days to come since they are special order.

On some items it is good to plan ahead because of matters like this. Sometimes it is prudent to order extra parts and have them on hand.

If you know that specific door holders, door contacts or keypads get damaged then order some to have on hand so when the forklift damages a contact you can replace it on the same day.

It is also wise to have metal guards installed so the forklift will be less likely to damage other equipment.

Some companies will even order certain things off of Ebay and other sites although care should be taken when doing this because many of our manufacturers such as Bosch offer a warranty and most of the time that does not apply when you buy parts off of certain web sites and sometimes you end up getting refurbished or B stock.

Call Larry Love at 801 898 6003 or at the office 801 428 1384 Larry@PeakAlarm.com

Bosch Radionics Security Parts Pricing from American Security & Fire, Inc.

Call for a current quote today

Call for a current quote today

American Security & Fire, Inc. is a BCSD Bosch Certified dealer here in Salt Lake City. Prices will vary depending on the project and the date when you receive the quote so be sure to call for a current quote. (801) 263 6002 and our address is 110 West 2950 South in Salt Lake City, Utah 84115. Shipping would also need to be added to the order.

Examples of general costs for these items is exactly that an example so be sure to call for your current quotes. Since we are a dealer we offer the limited 3 year warranty which most times you will not get when you buy used or from some sites where the equipment may be “B” stock which many times is refurbished. It is also good to go over your equipment list with a professional because many times depending on your needs and facility you might need additional equipment.Programing is $77 per hour plus $62 per hour travel.

D7412GV4 board only without an enclosure is $252
D7412GV4-A is $338
D7412GV4-B is $400
D7412GV4-C is $300
D9412GV4 board only is $450
D9412GV4-A package is $533
D9412GV4-B package is $590 – The B package (Fire Alarm)
D9412GV4-C package is $500
D1255 Keypad is $154
D1260 Keypad ATM style is $225
D1256 Keypad is a fire annunicator $154
D1265 is a virtual keypad – touchpad $300
D192G is $68
D263TH smoke is $38 – This is a 2 wire smoke
D273TH four wire smoke is $40
D298S base is $29 – check if it is 12V or 24 V D278S (12V)
D300A Duct Detector $170 call for tubes or remote test switches
There is also a High Voltage version of this same duct detector
D8125 Addressable loop module $70
D8125MUX $63
D9127U without tamper (Popit)$25
D9127T with tamper switch $29
D8129 Octorelay $100
B308 SDI2 module for Octo relay $100
D8128D Octo Input module $91
B208 SDI2 Octo Input module $91
D9210B $197
D928 dual line dialer $71
B420 Internet monitoring module $209
D7044 Monitor module for D7024 panel $31
D7050 Smoke head for D7024 panel $50

These prices should give you an idea of pricing for your project. Understand that when you put a project out to bid depending on the specifications the pricing may go up or down. We have been called in to fix many a job where the low bidder did not do the work or programing correctly and we as a BCSD Certified Bosch dealer went in to fix other peoples mistakes.